Industrial Wet Paint Shop · 213 RAL Classic Colors + NCS · Metals & Polymers

Industrial Spray Painting & Liquid Coating Services (RAL / NCS)

The STANIAX industrial spray painting facility in Józefów near Warsaw provides precision wet liquid coating for metal fabrications, aluminum and ZnAl die-castings, composite laminates, engineering plastics, and MDF. Unlike high-heat powder coating, our pneumatic and airmix spray technology coats heat-sensitive assemblies, delivers A-Class automotive smoothness without orange peel, and matches identical RAL, NCS, or Pantone shades across metal and plastic parts.

Industrial wet spray painting of technical components inside STANIAX spray booth

213

RAL Classic standard shades

25+ yrs

Surface coating experience

3 days

Express prototype turnaround

Industrial Wet Paint Shop Capabilities - Substrates & Coating Systems

Liquid spray painting is essential wherever powder coating fails due to its 200°C oven cure, thick orange-peel film that clogs fine threads, or inability to produce metallic, Piano Black, or haptic Soft-Touch finishes.

Scope of Industrial Spray Painting at STANIAX

Multi-coat anti-corrosion and decorative liquid systems for machinery, electronics, lighting, defense, and POS

  • Coating ferrous and non-ferrous metals: carbon steel, stainless steel, galvanized steel, aluminum, ZnAl die-castings, and brass (using 2K epoxy and Wash Primer foundations).
  • Coating composites (fiberglass GRP/FRP, carbon fiber, epoxy resins), MDF, and injection-molded engineering plastics.
  • Industrial two-component (2K) liquid chemistries: polyurethane (PUR), epoxy (EP), acrylic, alkyd, waterborne, and UV-curable coatings.
  • Four gloss and texture levels for any RAL/NCS color: High Gloss (>85 GU), Satin / Semi-Matte (25-45 GU), Deep Matte (<10 GU), and Fine Industrial Texture.
  • CAD-guided technical masking prior to painting: protecting threaded holes, EMC grounding pads, bearing seats, and bonding zones.
  • Full QA instrumentation: dry film thickness (DFT per ISO 2808), cross-cut adhesion (ISO 2409), and 60° gloss/color verification.
Technical Comparison: STANIAX Wet Spray Painting vs Traditional Powder Coating - technical specification table
Engineering CriterionWet Spray Painting (STANIAX)Traditional Powder CoatingB2B Advantage for Your Product
Curing temperature20 - 80°C (plastics, composites, assemblies) or up to 160°C (metal/glass)180 - 200°C (heat-resistant metals only)Coats plastics, laminates, bonded assemblies, and porous ZnAl castings without outgassing blisters
Dry film thickness (DFT) & detail15 - 45 µm (thin, high-definition film)60 - 120 µm (thick film that rounds sharp edges)Preserves crisp engravings, tight mechanical fits, and fine threads without paint buildup
Surface smoothness & hapticsClass-A mirror flow (Piano Black, true metallics, velvety Soft-Touch)Visible "orange peel" wavinessDelivers automotive-grade and premium consumer electronics aesthetics
Color flexibility & multi-material matchAny RAL, NCS, Pantone or custom match mixed from 1 literRestricted to stocked powder boxes100% identical shade across steel, aluminum, and plastic parts on the same machine

We support both one-off subcontracting batches and long-term kanban coating contracts for OEM machinery, lighting, and electronics manufacturers.

When Is Wet Industrial Spray Painting Superior to Powder Coating?

Product engineers and procurement teams frequently choose wet spray painting at STANIAX over powder coating in two critical scenarios: first, when coating pressure die-cast aluminum or zinc-aluminum (ZnAl) housings. In a 200°C powder oven, trapped air in die-casting micro-pores expands and "outgasses," leaving pinholes and craters. By curing our 2K epoxy-polyurethane wet systems at 60-80°C, we eliminate outgassing completely.

Second, when an appliance or luminaire combines aluminum extrusions, steel brackets, and ABS/PC plastic covers that must match in the exact same NCS or RAL shade and gloss level.

2K Anti-Corrosion & Adhesion Primers for Aluminum, Stainless Steel & ZnAl

Non-ferrous alloys and stainless steel form passive oxide layers that reject standard paints. Our pre-treatment protocol includes:

  • Multi-stage chemical degreasing and mechanical scuffing/abrasive conditioning to increase surface area.
  • Two-component epoxy primers (2K EP) and reactive etch primers (Wash Primer) delivering C2-C4 corrosion protection and 5B adhesion.
  • Spray surfacer filling of casting pores and weld seams on aluminum castings and fiberglass laminates prior to topcoating.

Fast Color Changeovers for Short Series & Custom NCS / Pantone Shades

Because we mix liquid coatings in-house to the exact liter required, we can economically coat short prototype runs of 10 or 50 pieces in bespoke architectural NCS or corporate Pantone colors alongside high-volume serial production.

Quality Control, Technical Masking & Protective B2B Packaging

Every batch undergoes dry film thickness (DFT) measurement, gloss inspection, and visual verification of Class-A surfaces. Completed components are wrapped in polyethylene foam, bubble wrap, or client-supplied returnable dunnage.

Available Finishes & Reference Comparison

Interactive Configurator: 21 RAL Classic Colors + 4 Surface Finishes

Click any RAL shade and select a gloss/texture level to preview the coating and transfer your specification directly into the quote form below.

RAL 9005 - Jet Black

RAL 9016 - Traffic White

RAL 9006 - White Aluminium

RAL 9007 - Grey Aluminium

RAL 7016 - Anthracite Grey

RAL 7021 - Black Grey

RAL 7035 - Light Grey

RAL 7024 - Graphite Grey

RAL 5002 - Ultramarine Blue

RAL 5005 - Signal Blue

RAL 5010 - Gentian Blue

RAL 5015 - Sky Blue

RAL 3000 - Flame Red

RAL 3020 - Traffic Red

RAL 2004 - Pure Orange

RAL 1021 - Rape Yellow

RAL 1036 - Pearl Gold

RAL 8017 - Chocolate Brown

RAL 8029 - Pearl Copper

RAL 6005 - Moss Green

RAL 6018 - Yellow Green

High Gloss (85 - 95 GU)

Deep mirror brilliance and easy-clean surface for decorative trims and premium enclosures.

Satin / Semi-Matte (25 - 45 GU)

The most versatile industrial finish combining high scratch resistance with refined low sheen.

Deep Matte (4 - 10 GU)

Contemporary, non-reflective architectural and technical finish.

Fine Industrial Texture (8 - 15 GU)

Micro-grained texture that hides machining marks, welds, casting pores, and handling scuffs.

Technological Process

4-Stage Industrial Spray Painting Process

From chemical-mechanical substrate conditioning to controlled thermal curing.

01

Degreasing, Conditioning & CAD Masking

We remove machining oils, abrade the substrate, and mask threads, EMC grounding pads, and bearing seats with silicone plugs and die-cut tapes.

Masking per 2D/CAD drawing

02

Anti-Corrosion / Adhesion Primer (2K EP / Etch Primer)

We spray a two-component epoxy, reactive wash primer, or high-build surfacer matched to steel, aluminum, ZnAl, composite, or plastic.

Corrosion barrier & 5B adhesion

03

Top Coat Spraying (RAL / NCS / Special Effect)

Inside our downdraft spray booth we apply 2K polyurethane or acrylic top coats in the specified shade, gloss, or texture.

Uniform 25-60 µm DFT

04

Oven Cure, Demasking & DFT Quality Inspection

We cure the coating at controlled temperature, remove masking cleanly, and log DFT and adhesion measurements prior to dispatch.

Full DFT & QA inspection report

B2B Advantages

Components & Substrates Coated in the STANIAX Paint Shop

Reliable B2B industrial coating subcontracting for manufacturers across Poland and the EU.

Aluminum & ZnAl Pressure Die-Castings · Electronic Enclosures, Racks & Controller Housings · Architectural & Industrial Lighting Fixtures · Machine Covers, Guards, Handles & Frames · Stainless Steel, Carbon Steel & Brass Parts · Fiberglass (GRP) & Carbon Fiber Composites · 3D Signage Letters, Lightboxes & POS Displays · MDF, Metal & Plastic Furniture Components · Full RAL Classic & RAL Design Palettes · NCS Architectural & Pantone Color Matching · 2K Polyurethane & 2K Epoxy Liquid Systems · Fine Texture & Hammer-Tone Industrial Finishes · Soft-Touch Coatings on Metal & Plastic · Metallic, Pearlescent & Anodized-Look Paints · Thread & EMC Grounding Pad Masking · Express 2-3 Day Prototype & Short-Run Coating

MACHINERY & ELECTRONICS OEMs

Outgas-Free Coating of Al/ZnAl Castings & Enclosures

We coat die-cast housings, heatsinks, and covers at low curing temperatures that prevent blistering, complete with precision thread and gasket masking.

Full compliance with client 2D/3D technical drawings

LIGHTING & ARCHITECTURE

Custom RAL / NCS Shades for Short & Medium Luminaire Runs

Customize architectural lighting profiles and housings in deep matte, satin, brushed brass, or custom NCS shades without massive powder minimums.

Exact color match across aluminum and plastic parts

SIGNAGE, POS & INDUSTRIAL DESIGN

Class-A Finishes on Composites, MDF & 3D Models

We prime, sand, and spray trade-show models, 3D channel letters, retail displays, and bespoke furniture in mirror gloss or velvet matte.

Custom fixtures for precision small parts and industrial housings

Industrial Case Studies

Industrial Spray Painting Case Studies (Hover to Magnify)

Inspect wet paint leveling and surface texture on metal and composite components.

Industrial spray painting of technical housings and castings at STANIAX

INDUSTRIAL ENCLOSURES

2K Polyurethane Spray Painting of Die-Cast Technical Housings

Multi-layer epoxy-polyurethane system on metal castings with precision masking of threaded bosses and mating flanges.

Total system DFT: 55 µm · Adhesion 5B

Components after high-gloss and metallic spray painting at STANIAX

DECORATIVE & LIGHTING PARTS

High-Gloss & Metallic Liquid Coating in Custom Palette

Metallic basecoat sealed with a 2K high-solid clear coat delivering automotive Class-A depth with zero orange peel.

60° Surface gloss: >92 GU

Serial industrial spray painting of components at STANIAX Józefów plant

SERIAL RACK PRODUCTION

Batch Spray Coating of Complex 3D Geometries

Uniform coverage of recessed ribs and edges on custom rotary hanging fixtures.

100% RAL/NCS shade repeatability across batch

Frequently Asked Questions About Industrial Spray Painting

Answers for mechanical engineers, product designers, and B2B buyers.

How does wet industrial spray painting differ from powder coating?

Wet spray painting cures at low temperatures (20-80°C), allowing us to coat plastics, composites, MDF, bonded assemblies, and porous ZnAl/Al die-castings that would warp or blister in a 200°C powder oven. Wet painting also applies a much thinner film (15-45 µm) that preserves fine threads and sharp engravings, and enables mirror Piano Black, true metallics, and Soft-Touch finishes.

Which materials can you coat in your spray paint shop?

We coat carbon steel, galvanized steel, stainless steel, aluminum, ZnAl die-castings, brass, copper, engineering plastics (ABS, PC, PP, PA, PMMA, PS), fiberglass and carbon composites, polyurethane/epoxy castings, glass, ceramics, and MDF.

Do you mask threads, bearing seats, and EMC grounding surfaces?

Yes. Working from your 2D/CAD drawings, we apply silicone plugs, tapered caps, high-temp tapes, and custom die-cut masks so threaded holes, tolerances, and conductive grounding pads remain completely free of paint.

Can you paint a small batch in a custom NCS or Pantone color?

Yes. Our in-house mixing lab formulates any RAL Classic, RAL Design, NCS, or Pantone shade - or matches a physical master sample - starting from just 1 liter of paint, making short series and prototypes highly cost-effective.

What is the maximum part size you can spray paint?

Our spray booths accommodate everything from millimeter-sized precision components mounted on custom racks up to larger industrial enclosures, covers, and structural parts.

What is the standard turnaround time for industrial spray painting?

Standard serial production projects take 5-10 business days. For urgent R&D prototypes and pre-series samples, we offer an express 2-3 business day mode upon scheduling.

Request a Quote for Industrial Spray Painting (RAL / NCS)

Share your substrate material, dimensions, RAL/NCS color code, finish (gloss, satin, matte, texture), and batch size. Any RAL color selected in the configurator above is automatically pre-filled below.

Industrial spray painting of metals & castings (Al, ZnAl, steel) · Enclosure & component painting with precision CAD masking · Coating of composites, fiberglass, MDF & 3D models · Multi-material sets (metal + plastic painted in matching color) · Express prototype run / custom sample color matching

STANIAX Sp. z o.o. · ul. kard. Stefana Wyszyńskiego 116A, 05-420 Józefów, Poland

Explore Related STANIAX Coating & PVD Technologies