Vacuum Metallization & UV Coating of Polycarbonate (PC) & PEI
Outgassing-controlled aluminum PVD for automotive lighting optics, aerospace cabins, LED luminaires, and UV-protected lenses.
How is polycarbonate (PC) and Ultem PEI metallized without vacuum hazing or solvent crazing?
Polycarbonate and high-temp Ultem PEI absorb ambient moisture that causes cloudy aluminum bloom inside a vacuum chamber. STANIAX performs pre-conditioning degassing, applies non-aggressive UV or high-temp barrier primers (up to 220 °C on PEI/BMC), deposits 99.99% aluminum (>92% reflectance), and seals optics with a protective topcoat.
Process Parameters & Quality Standards
| Parameter | STANIAX Specification |
|---|---|
| High-Spec Resins | Optical PC, High-Temp PC-HT, Ultem PEI, PSU, thermoset BMC |
| Thermal Service Rating | Up to 135 °C (PC-HT) and 200-220 °C on PEI/BMC reflectors |
| Specular Light Return | High mirror reflectance with PVD aluminum + protective barrier |
| Clear Polycarbonate Shield | Industrial abrasion- & UV-resistant hard clearcoat |
| Chamber Control | Pre-bake moisture conditioning + antistatic ionization |
Moisture Desorption & Solvent Compatibility on Optical PC & Aerospace PEI
Polycarbonate and polyetherimide (Ultem) remain sensitive both to stress-cracking solvents and dissolved atmospheric water vapor during pump-down to 10⁻⁴ mbar. Uncontrolled runs yield iridescent rainbow bloom around injection gates.
Drawing on 30+ years of optics metallization, STANIAX validates moisture pre-drying schedules and solvent-safe barrier basecoats engineered specifically for PC-HT, Matrix LED light bezels, and Ultem aerospace covers.
- • Clean optical gates without silvery burn around ribs and bosses
- • Selective masking shields transparent light guides or sensor windows
- • Validated -40 °C to +150 °C automotive thermal shock stability
Reflector Protective Topcoats vs Exterior Lens UV Hard-Coats
Internal projector optics require bare-metal reflectance (>92%) coupled with corrosion shielding from headlamp condensation - achieved cleanly via ultra-thin protective topcoat sealing. Exposed polycarbonate housings and lenses receive thicker UV-crosslinked clearcoats blocking road abrasion and yellowing.
Our tooling department fabricates custom silicone shields so complex PC-HT headlamp bezels and light-guide frames receive razor-sharp transitions between high-reflection PVD zones and low-gloss black anti-glare surfaces in a single integrated production flow.
Typical Industrial Applications
- • Bi-Xenon, Matrix LED, and commercial lighting reflector bowls & bezels
- • Aerospace interior assemblies and Ultem PEI shrouds
- • Architectural LED street and stadium aluminum-plastic optical cups
- • UV hard-coated transparent polycarbonate lenses & instrument shields
Technical FAQ
Do you metallize Ultem PEI parts for aerospace or medical instrumentation?
Yes - see our aerospace partnership case detailing vacuum metallization of PEI structural skins for weight reduction and shielding.
Why can conventional primers melt or craze polycarbonate?
Standard high-aromatic thinners attack amorphous PC polymer chains under residual injection stress; we use strictly PC-safe barrier chemistry.
Can transparent light pipes on a PC bezel stay crystal clear?
Yes, precision masking covers light windows during spray priming and aluminum deposition.
Can you coat thermoset BMC headlight reflectors as well?
Yes, BMC (Bulk Molding Compound) reflectors tolerate temperatures above 200 °C and are routinely re-metallized inside our plant.
Related Services & Specifications
Polycarbonate PC / PEI: Discuss specifications directly with STANIAX engineers
STANIAX · Józefów 05-420